Realacc RX5808-PRO-PLUS-OSD 5.8G 48CH FPV Receiver Achilles Open Source W/Cover For Fatshark Goggles - 51.00 €

Realacc RX5808-PRO-PLUS-OSD 5.8G 48CH FPV Receiver Achilles Open Source W/Cover For Fatshark Goggles
Seller: Banggood,
Free shipping aviable, Registered postage from 25 €


Realacc RX5808-PRO-PLUS-OSD 5.8G 48CH FPV Receiver W/Cover For Fatshark Dominator Attitude Goggles


Description
Dimension : 43*28*18mm
Weight : 26.7g
Power Supply : 5V
Max Current : 300mAh
Support Fatshark Goggles : Dominators/Dominator V2/Dominator V3/Dominator HD/Dominator HD V2/Dominator HD V3 /Dominator SE /Attitude V3 - Some modification required
Note :
The position of pins socket on Attitude V4 are different from other Fatshark goggles. You can cut or unsolder the original pins of receiver, and resolder a spare pins head that special for V4 goggles on it, the spare pins head is included in package .

Features
Integrate buzzer and USB port
New OSD function(Only Achilles supports), can display the menu information on both receiver OLED and goggles screen(can be turned off), no need to take off the glasses when you adjust the parameter.
Adopt popular STM32 chip, advanced optimization on hardware design.
Reserved port for fatshark control for secondary development, enhance its functions and extend its period

Compatible with multi firmwares that created by many forum communities :
(Download the firmware, burn it to receiver via CF, BF or INAV software, same as the way to burn firmware into the flight controller. Before you burn the firmware in it, press the BOOT and power on the receiver.)

1.http://www.pirxthepilot.com (Free,recommanded)

2.https://achillesfpv.eu/dowload-free-achilles (OSD function need to pay for use, recommanded)

3.https://github.com/piodabro/WPro58

4.https://github.com/dmartingarcia/Eachine-58PRO/releases (Free)


Compared with RX5808 PRO PLUS & Furious
New RX5808 PRO PLUS Furious
Chip STM32 F1 Chip, faster operating rate MWC chip,slower rate MWC chip,slower rate
Screen Display & Adjustment Built-in OSD, dual display menu on OLED and goggles
Button on receiver can adjust the menu
OLED screen display
Adjust the menu by RX button
OLED screen display
Adjust the menu by RX button
Support Firmware Open Source/Support multi firmware
New : Seeking Function
Open Source Closed Source
Upgrading Firmware
(burning)
Upgraded by USB port, connecting with CF/BF/INAV FC, upgrade it on configuration interface USB USB
Disadvantage
New firmware, may pay for it Not popular chip, lower rate then STM32, no much open source firmware for it Not popular chip, high cost low rate, closed source limited, high power consumption


Package Included
1 x RX5808-PRO-PLUS-OSD Receiver
1 x Cover

































More similar


Add Comment