FunFly FPV - Channel
-
Mini-H ZMR 250 Maiden FPV Flight
Mini-H: -ZMR Carbon Fiber 250 Frame -Tiger 2206 Motors -20A SimonK ESC's -FlySky TX/RX -FatShark... -
Mini Me CC3D ZMR 250
Upgraded the ZMR 250 to the latest 14.10 'Mini Me' CC3D firmware. The quadcopter has a Orange LRS... -
HobbyKing 250 Long Frame FPV Racer Mini X FPV
HobbyKing 250 Long Frame FPV Racer Mini X FPV at the park. The Mini X is built from: - HobbyKin... -
ZMR 250 CF FPV Dual View Flight
Flying the ZMR 250 CF FPV in the park showing both the pilot and the HD view from the Mobius came... -
Cutting DAL 6040 Props to 5" Bullnose
I show how I cut and balance SurveilZone 6" 6040 props down to 5" Bullnose props. -
WLToys V262 Quadcopter FPV build and flight
I convert my WLToys V262 into a FPV quadcopter that I can fly with goggles or a FPV monitor. The... -
FPV: Tarot 250 flying & crashes
I show my little Tarot 250 racing frame and discuss how I modified it. I really like this frame a... -
CC3D with CleanFlight - Setup
I flash my HobbyKing 250 LF experimental quadcopter with CC3D with the CleanFlight Firmware and s... -
CC3D with CleanFlight - AutoTune
I attempt to use the CleanFlight Autotune function to tune my PID settings for the CC3D flashed w... -
CC3D Buzzer / Missing Alarm
Adding a missing alarm buzzer to a CC3D that you can control from your radio (PPM) for when you c... -
FailSafe on CC3D
I show how I set FailSafe on a CC3D with a cheap FlySky receiver that does not have built in Fail...