Dave Woods - Channel
A channel documenting my addiction to micro quadcopter madness.
-
6500kv 1103 motors on 3s
Another 1103 LOS flight to see how 6500kv on 3s stacks up against the 10000kv on 2s. -
1407 3200Kv 4s 3" prop comparison
Just some messing around trying to find the best 3" props for the 3200kv 1407's on 4s. I think 3... -
Fix those loose fitting micro props
This is how I fix loose fitting micro props. Others use dental floss as shown here: -
Update to my fastest Brushed FPV Setup
This video covers updates to my fastest brushed FPV setup. Flying starts at: 11:25 Bundle: / Fram... -
Micro Brushed Motors - PWM rate vs Max thrust
Issues suspected with this testing. Retesting is under way. -
My fastest Micro - Huge speed/power boost
Jumped up to 1304 motors and 20A ESCs from this build: Only added ~10g but a ton more power and ... -
Tips for maintaining line of sight orientation
I often get asked how I maintain Line of sight orientation while flying. This video is an attemp... -
A little FPV with my fastest brushed Setup
Starts with 5 66' laps in ~34 seconds then a couple minutes of free flying. This is from the buil... -
-
Easy acro with Syma X1/X3 Blade nano QX frankenquad
Syma X1/X3 nQX frankenquad is super easy to fly but very acrobatic at the same time. An excellen... -
Installing GWS 5443 propellers on a Syma X1 or X3 quadcopter drive train
This video shows how I was easily able to modify GWS 5443 propellers to fit onto the hex shaped d... -
1103 build part 2 100mm Quadcopter assembly
Prototype Frame 1103 10000kv racerstar motors F3 Racercube flight controller & 4in1 ESC 66mm FPV ...
