Fatshark Attitude V3 Disassembly and Lens Cleaning - EASY FIX

If you own a pair of Fatsharks, you wouldn't want anything to stand between your eyes and the clean image of the displays of your FPV goggles.
Dust particles may have found a way into the display assemblies and you have to either clean the LCD display or the lenses - or both.
No worries though, it is an easy fix. Just make sure you do this in a clean environment and that you work slowly and carefully.
This is EASY FIX: Fatshark Attitude V3 Disassembly and Lens Cleaning. Let's go!
Caution concerning warranty:
Contact your nearest service center or the customer service of Fatshark before you decide to proceed on your own. Disassembling your goggles will possibly not void your warranty but opening up the display modules to clean the lenses will most definitely will.
____________________
*If you like my content and want to support the channel, you can use the affiliate links below. I get a small kickback from the store if you decide to buy something and it costs nothing extra to you.
Thank you in advance!
There are various types of air blowers. You don't need anything special but there are also some options with a built-in dust filter on their intake if you want. You can find some examples below:
(with dust filter)
I also use disposable microfiber cloths for camera lenses. You can check your local camera store, the cloths can vary in quality - good ones clean perfectly and leave no residue behind.
-------------------------------
This video features the song "New Tires" by Silent Partner, available under a Creative Commons License
Song link:
Artist link:
CC-by license: /
-------------------------------
#FatsharkMods
#muteFPV
#FPVgoggles