Brother Hobby 0804 and the little quad dilemma

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
Brother Hobby 0804 10000kv:
I guess they were available and as expected, too expensive to recommend. A Babyhawk R or a custom 1106-1108 2.5" size build would end up costing about the same.
Light 2S brushless (HIGHLY Recommended AUW well under 80g)
- Toothpick prototype (8g built frame)
- 450-550mah 2S:
- 1103/1104 ~9000-10000kv: (haven't tried, seems decent)
- Brother Hobby 0804 10000kv:
- KK 65mm twins: (magic props)
- Use this to drill out prop hole to fit 1.5mm shafts:
- F4 stack:
- Eachine Vtx: at 50mw not to overstress BEC
- Your choice of micro Rx
- Any FPV cam, I like the micro Predator: ,
The 1.45mm drill bit worked perfectly for the Brother Hobby motors. It's hard to say if it will work well for every motor since shafts can vary by about 0.1mm from motor to motor. You might want to get two or three of the drill bits, they're kinda fragile.
Tips?
Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
RaiBlocks: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.