FuriBee Stormer 220 FPV Racing Drone

FuriBee Stormer 220 FPV Racing Drone is another 200mm FPV racing drone from GearBest. The frame is made with thick 4mm carbon fiber, and feels solid. 2200kv motors with a bottomless design are an 'interesting' choice for this model. This design puts it an objectively slower category against the other FuriBee builds that have 2550kv or higher, such as the DarkMax 220. Being slower categorically doesn't mean that the entire unit is slow, however -- for what it is, the Stormer 220 holds its own.
The camera and fpv experience are good. Stormer 220 has a CCD 1/3 inches Sony SUPER HAD II with an IR block lens. The FPV video feed from the all-in-one Omnibus F4 + Video Transmitter combo with up to 200mw of power available is acceptable.
By default it's configured to use ONESHOT125 for the ESC protocol. You'll want to change this to DSHOT600 in betaflight settings. I also needed to enable UART6 for my receiver and set it to SBUS; but this was the Plug n' Fly version.
Overall, if you can get this for the right price, it's a decent starter FPV racing drone.
─── Purchase Links ───
► Stormer 220 (bind and fly with FrSKY receiver):
► Stormer 220 (plug and fly, add your own receiver):
─── Replacement Parts ───
►Stormer 200mm FPV Racing Drone Frame KIT:
► 2308 2200KV Brushless Motor For Stormer:
► 4mm 3K Carbon Fiber Arm Plate:
►4-in-1 35A BLHeli-S Brushless ESC:
► HS1177 CCD Camera:
► Furibee OMNIBUS F4 Flight Controller:
─── Recommended Receivers (FrSky) ───
These are my recommended FrSky receivers to purchase if you need one.
►FrSky XM+:
►FrSky R-XSR:
─── Goggles are not included! ───
Need cheap goggles with this?
► Furibee VR01 Goggles:
───────── Music ─────────
♫ Antti Luode - Echos
✖ Disclosure: I may earn a small commission for my endorsement, recommendation, testimonial and/or link to any products reviewed. Your purchase helps support my work in bringing you real, unbiased information about RC products. Thank you!