Runcam 3 - First flight (XJaguar Acro on Eichberg)

Runcam3: also check their Facebook site - they have some giveaway going on there:
See if you like the Runcam3 HD cam's image here! Also expect some acro flying with the XJaguar at my favourite spot (Eichberg). Expect a proper tech-review with comparison shots soon - but I wanted to get out of the boring hangar with this cam...
►SUBSCRIBE: ►SchimSTAGRAM:
Battery-Time:
in room temp, 1080p60/WDR it gave 68mins and got medium warm. When battery was empty it safed the file this time.
recomended settings:
at noon with plenty sunlight: 1080P 60FPS, WDR off (will make the color more naturally)
cloudy at afternoon: still choose 1080P 60FPS, WDR ON
low light: 1080P 30FPS, WDR on
Swift2:
On the XJaguar the VTX/OSD board died once again (crap!). All I need is voltage to see if my battery goes
flat, so I tried the CAMs built in OSD. It's simply great!
2 options:
use dedicated wire from main battery + to volt sensing port on cam (more accuracy on the volts, but some soldering)
...or just get power from balance plug to VTX - to cam (both need to be able to handle the 16.8v!).
Some VTX output only 5v for the cam - than it doesnt work...
The VTX-Cam Volt might be filtered a bit - so you loose some accuracy - but it worked for me.
Tip: Access the Runcam Swift 2 "additional" menu by holding up arrow 2 sek - it's NOT in the "normal" menu!
►EQUIPMENT:
►►find infos on all my copters here in my Hangar:
filmed with: Yi4k, Runcam 3
related Playlists:
►my TOP Videos:
►Multicopter DIVES
►Product Reviews:
►FACEBOOK me:
►INSTAGRAM:
►TWITTER:
►visit my BLOG:
▼Music▼
Palastic, LissA - Side Note
Leyya - Butter