716 Brushed Motor Thrust Testing. BetaFPV, Flight-Sky & GnarlyFPV

Hello everyone welcome back.
In today's video I will be doing some very crude motor and prop trust testing. In this video I will be pitting the BetaFPV, Flight-Sky and GnarlyFPV 716 brushed motors. In this test I used my homemade rig which consists of the motor mounts and ducts from a Beta 75 and a Beta 65s frame. I used standard 4 blade props for this test. Each test I used a fully charged LIHV 260mah BetaFPV battery. The motor was then cranked up to max in BetaFlight for a few seconds and the sustained pressure was measured.
The results were the following
BetaFPV - 8.4grams
Flight-Sky - 7.9grams
GnarlyFPV - 9.3grams
Here are the specs for each and where you can get them.
BetaFPV 716 17500kv Brushed Motor
Size: 7x16mm
Width:7mm
Height: 16mm
Cable length: 60mm
Shaft Diameter: 0.8mm
Weight: 2.9g (including cables and connector)
Speed: 17500kv or 56000RPM / 3.2V
Connector: JST 1.25mm 2P connector
Flight-Sky 716 17,500kv Brushed Motor
Size: 7x16mm
Width:7mm
Height: 16mm
Cable length: 60mm
Shaft Diameter: 0.8mm
Weight: 2.9g (including cables and connector)
Speed: 17500kv or 56000RPM / 3.2V
Connector: JST 1.25mm 2P connector
GnarlyFPV 716 Brushed Motor
Can size: 7x16mm
Shaft length : 5mm
Shaft diameter : 1mm
Wire length : 45mm
Plug - Micro JST 1.25
CW - Black Bottoms
CCW - Grey Bottoms
Operating Voltage - 2 - 4.35v
www.GnarlyFPV.com
Thank you very much for watching
Like, Share & Subscribe
Fly Safe & Fly Often