[BUILD] Knuffel V2 F3P PART 1 - The Airframe

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
This is my [BUILD] of the Knuffel V2 by slowflyworld.de. In this first part of this four part series, I built the whole airframe without any electronics yet. Part 2 is gonna be the carbon frame reinforcements and the remaining hardware.
COMING SOON!
Some facts about the Knuffel V2:
-84cm wingspan
-87cm length
-weight between 120g-200g
-3mm Depron
It is a small lightweight F3P plane, which means indoor 3D. I run it on the following parts (all Hobbyking):
2205 1400kv brushless outrunner with an 8x6 sf prop
2s 460mAh 25c nano-tech lipos
Plush 12A 2A BEC ESC
3 5g Hextronik servos
and a OrangeRX Spektrum R410 4ch
If you want to read more about it, please visit:
Music by: Gramatik
Please leave a like rating and ask your questions or suggestions in the comment section down below.
Don't forget to subscribe!
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.