Firmware flashing receivers on the FrSky X9D & QX7

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
A viewer commented a few days ago in my previous video about how to flash an XM+ that it wasn't working for him on his QX7. It turns out that newer QX7's use the S-Port at the bottom of the radio, so I thought it might be handy just to revisit the flashing tutorial.
Please take a look at the original videos for a bit more info
Sadly, my QX7 is an older one that doesn't have any pins in the S-Port, so I can't actually demo it - but the main thing is to use a regular servo cable and not swap the voltage/ground pins.
I use an XM+ as an example here, but if you are flashing receivers with a smart port - use the bundled cable they provide and again, only swap the ground/voltage if you use the expansion bay pins to flash.
The stuff I use in this video (affiliate links used). I actually have a really old original Taranis X9D, you can only get the X9D+ nowadays
The QX7 is available in lots of funky colours
The XM+ receiver (I love these on my miniquads)
You might want to alternatively check these on Gearbest as well
If you liked this video and want to show your support - either through subscribing, using an affiliate link, becoming a Patreon supporter or buying a T-shirt, then check out all the ways you could help out here /
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.