Flyegg130 Build with FastBack Mod for Runcam Micro Swift!

Oops. dont forget ya beeper LOL forgot that bit.. and they are 3inch kingkong props, not 2.. faill. owell
Frame-
Esc/FC combo-
Vtx/Cam-
motors-
standoffs for mod-
Kapton Tape-
Props-
Betflight Settings-
# version
# Betaflight / OMNIBUSF4 (OBF4) 3.2.1 Oct 15 2017 / 19:42:16 (434db9a36) MSP API: 1.36
# name
name JJRotoGeek
# resources
# mixer
# servo
# servo mix
# feature
feature MOTOR_STOP
feature AIRMODE
feature ANTI_GRAVITY
feature DYNAMIC_FILTER
# beeper
beeper -ON_USB
# map
# serial
serial 0 64 115200 57600 0 115200
# led
# color
# mode_color
# aux
aux 0 0 1 1700 2100
aux 1 1 0 900 1300
aux 2 2 0 1300 1700
aux 3 13 3 1700 2100
aux 4 35 2 1700 2100
# adjrange
# rxrange
# vtx
# rxfail
# master
set gyro_notch1_hz = 0
set gyro_notch1_cutoff = 0
set gyro_notch2_hz = 0
set gyro_notch2_cutoff = 0
set baro_hardware = NONE
set min_check = 1075
set rssi_channel = 14
set serialrx_provider = SBUS
set motor_pwm_protocol = DSHOT600
set current_meter = NONE
set yaw_motors_reversed = ON
set small_angle = 180
set deadband = 10
set yaw_deadband = 10
set pid_process_denom = 1
set osd_units = IMPERIAL
set osd_tim2 = 769
set osd_vbat_pos = 2422
set osd_rssi_pos = 2391
set osd_tim_1_pos = 54
set osd_tim_2_pos = 2380
set osd_flymode_pos = 333
set osd_throttle_pos = 225
set osd_vtx_channel_pos = 377
set osd_crosshairs = 200
set osd_ah_sbar = 200
set osd_ah_pos = 200
set osd_current_pos = 385
set osd_mah_drawn_pos = 353
set osd_gps_speed_pos = 218
set osd_gps_lon_pos = 82
set osd_gps_lat_pos = 65
set osd_gps_sats_pos = 51
set osd_home_dir_pos = 302
set osd_home_dist_pos = 303
set osd_compass_bar_pos = 266
set osd_altitude_pos = 247
set osd_pid_roll_pos = 423
set osd_pid_pitch_pos = 455
set osd_pid_yaw_pos = 487
set osd_debug_pos = 1
set osd_power_pos = 321
set osd_pidrate_profile_pos = 345
set osd_warnings_pos = 329
set osd_avg_cell_voltage_pos = 2403
set osd_pit_ang_pos = 257
set osd_rol_ang_pos = 289
set osd_battery_usage_pos = 392
set osd_disarmed_pos = 138
set osd_nheading_pos = 311
set osd_nvario_pos = 279
set osd_esc_tmp_pos = 82
set osd_esc_rpm_pos = 83
set osd_stat_max_spd = OFF
set osd_stat_max_curr = OFF
set osd_stat_used_mah = OFF
set osd_stat_bbox = OFF
set osd_stat_bb_no = OFF
set vcd_video_system = 2
# profile
profile 0
set dterm_lowpass_type = PT1
set dterm_notch_hz = 0
set dterm_notch_cutoff = 0
set anti_gravity_gain = 7000
set p_pitch = 41
set i_pitch = 55
set d_pitch = 20
set p_roll = 35
set i_roll = 42
set d_roll = 20
# rateprofile
rateprofile 0
set rc_rate = 135
set rc_rate_yaw = 135
set roll_srate = 77
set pitch_srate = 77
set yaw_srate = 77
#