FPV Setup List X-uav Clouds ♦ Dragonlink○1.2 vTx○Airblade

▬Setup Below▬ After almost two weeks I’ve completed Patiently building the X-uav clouds. I consider this the first stage since I would like to fabricate a pan & tilt system on the nose of this platform which does looks like a bit of a challenge and add custom 9x6.5 three blade props. I've also mounted a rear Runcam setup on GoPro mounts which I call the Scorpion cam. If you have any questions in regards to the build please feel free to ask & thanks for viewing.
Platform Setup ↓
▬▬▬▬▬▬▬▬
X-uav Clouds 1880mm
Motor 28-14 / 810KV 4s setup
Prop APC 9x6 E & EP
ESC 40a HiTec Energy Sport
BEC Castle 10a Externally
Servos Hitec HS-55
FC Cyclops Storm OSD
10v 5600uF Rx Capacitor
GWS S125 Pan 360° servo
FPV Peripherals ↓
▬▬▬▬▬▬▬▬
Dragonlink v2 UHF
VAS 433MHz/1.2GHz notch filter
Trackimo GPS Tracker -
1.2/3GHz 800mw vTx
VAS LHCP Airblade
VAS Pepperbox on GS
Sony Effio 700TVL CCD Flight cam
Toroid on CCD, vTx, BEC,ESC and GWS Servo wires
Runcam HD Rear "Scorpion" Cam
Firefly Q6 HD For Recording
Flytron Strobon 5w Navs