Storm Loki X3 SRD130 RadioLink R9DS Receiver Repair
Storm Loki X3 SRD130 RadioLink R9DS Receiver Repair
Today we show you how to remove, reinstall and bind the RadioLink R9DS receiver on the Storm SRD Loki X3. Enjoy!
If you found this helpful, Please consider leaving a LIKE! If you're new to my channel, WELCOME! Please SUBSCRIBE!
Thank you and Happy Flyin!
RadioLink R9DS:
Loki X3
Storm Loki X3:
Designed from ground up, full of innovations, meet the all new weapon for top level FPV racing
Storm Loki-X3 Storm Spec Edition
The Loki-X airframe is built for the new generation of FPV racing, it's one of the lightest airframe on the market delivering unparalleled handling and speed for every racer. Storm picked only the best material on the Loki-X3 racing drone, to build a well assembled, expert-tuned racing machine ready for any top level competition and any aggressive flying.
The Loki-X3 is one of the few 130 size racer which is compatible with 26mm cameras (HS1177 size), when you get a bigger camera, you get better image. It adopted the 3mm carbon fiber plate "Unibody" main frame and 1.5mm top plate, the full airframe weighs 31 g only, all-up-weight is an amazing 184 g (stock setup, includes all flight electronics and FPV gear but without Lipo and HD camera), it's definitely one of the lightest 3" propeller airframe. Super narrow arms to minimize drag, width is just 9mm, compare with other drones with board arms you can feel the Loki-X3 has faster respond in every way, narrow arms really improves aerodynamics!
The Loki-X3 is perfect for both LOS (Line of Sight) and FPV (First Person View) players, very easy to control, sharp and precise handling. Compact frame design has the best C.G. and well balanced in both pitch and roll axis, perfect center of gravity in the middle which is considered a great advantage for freestylers who do some crazy move in speed.
Utilizing the lightweight and powerful BrotherHobby 1407-2800kv Motor, Flycolor Raptor-S Tower 4-in-1 FC + 30A BLHeli_S ESC and HQ 3 x 3 x 3 tri-blade propellers running on 4S battery, sit tight and experience the shockingly high speed from the monstrous power system. The RunCam Swift 2 600TVL CCD camera combined with the Storm FX799T 200mw video transmitter and Lumenier AXII 5.8Ghz Antenna, you’ll be able to see wherever your Storm Loki-X3 flies, up close and personal.
Radiolink R9DS, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S and AT10.
SBUS and PWM signal possible working at the same time.
Two signal working mode:
(1)PWM signal output working mode：red LED indicates PWM signal output, 9 channels Totally
(2) SBUS signal output working mode: blue/purple LED indicates SBUS signal output, 10 channels totally. SBUS and PWM signal possible working at the same time with SBUS signal output working mode. CH9 output SBUS signal, the original CH1 to CH4 output CH7 to CH10 PWM signal at the same time.
S9RD
1) Channels: 9 channels: output 9 channels PWM signal, with red LED 10 channels: output 10 channels signal, support SBUS and PWM signal output synchronously, with blue LED.
2) Working voltage: 4.8-10V
3) Working current: 38-45mA（input voltage: 5V）
4) Size: 43*24*15 MM
5) Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10 display when work with flight controller APM or PIX.
6) 4096 section precision, 0.25us per section, servo anti-shake rudder.
7) MINI receiver, just need one cable if use SBUS signal.
Please connect with me!
Facebook: /
Twitter:
Instagram: /
Patreon:
Music:
Today we show you how to remove, reinstall and bind the RadioLink R9DS receiver on the Storm SRD Loki X3. Enjoy!
If you found this helpful, Please consider leaving a LIKE! If you're new to my channel, WELCOME! Please SUBSCRIBE!
Thank you and Happy Flyin!
RadioLink R9DS:
Loki X3
Storm Loki X3:
Designed from ground up, full of innovations, meet the all new weapon for top level FPV racing
Storm Loki-X3 Storm Spec Edition
The Loki-X airframe is built for the new generation of FPV racing, it's one of the lightest airframe on the market delivering unparalleled handling and speed for every racer. Storm picked only the best material on the Loki-X3 racing drone, to build a well assembled, expert-tuned racing machine ready for any top level competition and any aggressive flying.
The Loki-X3 is one of the few 130 size racer which is compatible with 26mm cameras (HS1177 size), when you get a bigger camera, you get better image. It adopted the 3mm carbon fiber plate "Unibody" main frame and 1.5mm top plate, the full airframe weighs 31 g only, all-up-weight is an amazing 184 g (stock setup, includes all flight electronics and FPV gear but without Lipo and HD camera), it's definitely one of the lightest 3" propeller airframe. Super narrow arms to minimize drag, width is just 9mm, compare with other drones with board arms you can feel the Loki-X3 has faster respond in every way, narrow arms really improves aerodynamics!
The Loki-X3 is perfect for both LOS (Line of Sight) and FPV (First Person View) players, very easy to control, sharp and precise handling. Compact frame design has the best C.G. and well balanced in both pitch and roll axis, perfect center of gravity in the middle which is considered a great advantage for freestylers who do some crazy move in speed.
Utilizing the lightweight and powerful BrotherHobby 1407-2800kv Motor, Flycolor Raptor-S Tower 4-in-1 FC + 30A BLHeli_S ESC and HQ 3 x 3 x 3 tri-blade propellers running on 4S battery, sit tight and experience the shockingly high speed from the monstrous power system. The RunCam Swift 2 600TVL CCD camera combined with the Storm FX799T 200mw video transmitter and Lumenier AXII 5.8Ghz Antenna, you’ll be able to see wherever your Storm Loki-X3 flies, up close and personal.
Radiolink R9DS, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S and AT10.
SBUS and PWM signal possible working at the same time.
Two signal working mode:
(1)PWM signal output working mode：red LED indicates PWM signal output, 9 channels Totally
(2) SBUS signal output working mode: blue/purple LED indicates SBUS signal output, 10 channels totally. SBUS and PWM signal possible working at the same time with SBUS signal output working mode. CH9 output SBUS signal, the original CH1 to CH4 output CH7 to CH10 PWM signal at the same time.
S9RD
1) Channels: 9 channels: output 9 channels PWM signal, with red LED 10 channels: output 10 channels signal, support SBUS and PWM signal output synchronously, with blue LED.
2) Working voltage: 4.8-10V
3) Working current: 38-45mA（input voltage: 5V）
4) Size: 43*24*15 MM
5) Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10 display when work with flight controller APM or PIX.
6) 4096 section precision, 0.25us per section, servo anti-shake rudder.
7) MINI receiver, just need one cable if use SBUS signal.
Please connect with me!
Facebook: /
Twitter:
Instagram: /
Patreon:
Music:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.