EMAX Babyhawk won't arm (Solved and Explained)

I have received some requests from some viewers that are having issues with the Emax Babyhawk not arming.
In this short video I explain the most common issue of why lots of people are having problems with their Babyhawk not arming.
Please try the first fix mentioned in the video and if that does not work then make sure that to look at you Betaflight settings as follows.
Check your receiver tab in BF and make sure that your Stick range settings match the min,mid range and max range settings via the receiver tab and the Config tab in Betaflight.
If they do not match, then subtrim your radio so that your settings on the receiver movement graph match the range settings listed in Betaflight.
These settings are found on the BF config tab listed as ESC/motor features and the mid range listed on the Receiver tab.
To check the range of your radio switch,use the BF modes tab.
Please note that when the Arming is set up correctly on the Modes tab, that you should save on that tab and then see the Arm button turn yellow when you throw your switch via the radio.
Thank you for watching the RC Sane Asylum channel and please leave a like and subscribe if you haven't already done so..
All that helps me keep the channel going and allows me to bring you all new content.
If you have any questions or comments , please leave them below.
I always appreciate feedback from my viewers.
Happy flights! Sincerely Desode