SWH170 "KERMIT" - FPV MAIDEN (RAW) - Dys 1306/3100 - 4045 props - Naze CleanFlight
PROBABLY THE MOST FUN YOU CAN HAVE (semi-legally) OUTDOORS WITH YOUR CLOTHES ON!!!
The SWH170 - Codename "KERMIT" - is the new 170mm micro racing frame from Skunkworx Hobbies and Red20RC.
This was the first proper FPV flight of the frame. It was windy and, after thinking I had forgotten the remote for the DVR, I somehow managed to squeeze a Mobius onto the front of the frame.
Specifications:
SWH170 Kermit Micro Quadcopter V1
Material: 1.5mm & 3mm Taiwan Matte Carbon Fiber or Taiwan Twill Glossy Carbon Fiber
Wheelbase: 170mm
Weight: 62g
Hardware: Black Nylon and Steel
Motor mounts: Square M2 mounting patterns to suit most 1306 – 1806 motors
Power Distribution: Hextronic™ Mini PDB supplied with frame
Flight Controller: Optimised for Naze32 and CC3D size boards
Flight Camera: To suit mini CCD/CMOS cased FPV camera
My Setup:
Motors: DYS 1306/3100kv
ESCs: 10A BLheli Multistar ESC
Flight Controller: Naze32
Propellors: GemFan 4045 CRP Props
Battery: 850-1000mah 3S (40C min)
Receiver: FRSky D4R-II
Flight Camera: Mini CMOS
Video Transmitter: 200mw mini 5.8ghz
To be honest, I'm not the best pilot but this is just the most fun quad I have ever flown. It is so fast and responsive (even with my crappy fast tune) that it just begs to be thrashed. The 1000mah 40C Zippy packs I was using couldn't hack it and the 850mah 75-90C NanoTechs were barely holding on.
I can't wait to see what some really good pilots can do with Kermit...
/
The SWH170 - Codename "KERMIT" - is the new 170mm micro racing frame from Skunkworx Hobbies and Red20RC.
This was the first proper FPV flight of the frame. It was windy and, after thinking I had forgotten the remote for the DVR, I somehow managed to squeeze a Mobius onto the front of the frame.
Specifications:
SWH170 Kermit Micro Quadcopter V1
Material: 1.5mm & 3mm Taiwan Matte Carbon Fiber or Taiwan Twill Glossy Carbon Fiber
Wheelbase: 170mm
Weight: 62g
Hardware: Black Nylon and Steel
Motor mounts: Square M2 mounting patterns to suit most 1306 – 1806 motors
Power Distribution: Hextronic™ Mini PDB supplied with frame
Flight Controller: Optimised for Naze32 and CC3D size boards
Flight Camera: To suit mini CCD/CMOS cased FPV camera
My Setup:
Motors: DYS 1306/3100kv
ESCs: 10A BLheli Multistar ESC
Flight Controller: Naze32
Propellors: GemFan 4045 CRP Props
Battery: 850-1000mah 3S (40C min)
Receiver: FRSky D4R-II
Flight Camera: Mini CMOS
Video Transmitter: 200mw mini 5.8ghz
To be honest, I'm not the best pilot but this is just the most fun quad I have ever flown. It is so fast and responsive (even with my crappy fast tune) that it just begs to be thrashed. The 1000mah 40C Zippy packs I was using couldn't hack it and the 850mah 75-90C NanoTechs were barely holding on.
I can't wait to see what some really good pilots can do with Kermit...
/
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.