EMAX Babyhawk Micro running 3S 350mah
This was the first 3S pack, so please forgive the lack of flow, I was just testing out flips and punchout ;) Jello in the punchouts is from too high p-gain.
Had great fun with the EMAX Babyhawk running 2S, but it lacked a little power when recovering from bigger dives and hard turns. It's rated for 2S, so I wasn't sure it would survive 3S. I had to lower the PIDS a little, and it's still getting some oscillation on punch outs, but it flies FANTASTIC. I also removed the prop guards and changed the power connector to XT30. Running Betaflight 3.1.7 w/ DSHOT 600 (requires a wiring mod for motor 4)
3 minutes flight time, battery came down slightly warm @ 3.78v per cell, and the motors were barely warm to touch.
Emax Babyhawk:
3S 450Mah Lipo:
Had great fun with the EMAX Babyhawk running 2S, but it lacked a little power when recovering from bigger dives and hard turns. It's rated for 2S, so I wasn't sure it would survive 3S. I had to lower the PIDS a little, and it's still getting some oscillation on punch outs, but it flies FANTASTIC. I also removed the prop guards and changed the power connector to XT30. Running Betaflight 3.1.7 w/ DSHOT 600 (requires a wiring mod for motor 4)
3 minutes flight time, battery came down slightly warm @ 3.78v per cell, and the motors were barely warm to touch.
Emax Babyhawk:
3S 450Mah Lipo:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.