EMAX Babyhawk Micro running 3S 360mah Tuned Acro

When I first flew the Babyhawk on 2s, it performed well with the stock PIDS, but when I switched to 3S it flew terrible. Now that I've had time to tune it, there's no going back.
Running Betaflight 3.1.7 8k/8k Dshot600 (wiring mod for motor 4)
Info on the wiring mod to enable dshot 600:
Switched to XT30 connectors and running 2.5 minutes on a Bonka 3S 360mah battery
EMAX Babyhawk:
Here's my settings dump, only use if you have done the dshot mod and are running 3S:
# Betaflight / SPRACINGF3EVO 3.1.7 Apr 3 2017 / 22:28:08 (e1c4b5c)
resource MOTOR 4 A15
resource PPM 1 NONE
resource SERIAL_RX 2 NONE
feature -RX_PPM
feature -TELEMETRY
feature -CURRENT_METER
feature -RSSI_ADC
feature -BLACKBOX
feature -TRANSPONDER
feature -SDCARD
feature RX_SERIAL
feature AIRMODE
feature FEATURE_ANTI_GRAVITY
map TAER1234
serial 2 64 115200 57600 0 115200
aux 0 0 1 900 1300
set rssi_channel = 16
set digital_idle_percent = 3.000
set motor_pwm_protocol = DSHOT600
set serialrx_provider = SBUS
set acc_hardware = NONE
set pid_process_denom = 1
profile 0
set d_lowpass_type = PT1
set d_lowpass = 110
set p_pitch = 40
set i_pitch = 40
set d_pitch = 40
set p_roll = 40
set d_roll = 40
rateprofile 0
rateprofile 0
set rc_rate = 96
set rc_rate_yaw = 96
set roll_srate = 83
set pitch_srate = 83
set yaw_srate = 83
set tpa_rate = 20