ZMR180 FPV build with less than 0.55lbs (250g) flying weight

In this video we present an FPVModel ZMR180 () FPV build with less than 0.55 lbs (250 g) flying weight. Full timelapse build video, build review & maiden flight sneak preview.
This is a long video, here are some jump points:
Time Lapse Build: 0:00
Build review: 14:25
Putting it onto the scales: 19:12
Maiden Flight Sneak Preview: 20:20
Room for weight improvement, to allow for larger Lipo:
- Dismantle receiver & solder cable directly
- Solder VTX antenna directly to VTX
- Shorten Lipo balancer cable
Using a mini CMOS camera will save you another 10g, but might degrade your FPV image quality in certain situations:
Here is your shopping list:
If you can, buy the frame directly from FPVModel, this will also let you chose the version (M2 in our case):
ZMR180 frame with PDB:
Banggood:
ZMR180 frame with PDB:
DYS 1306 motors:
GF 4045 props:
LittleBee ESCs:
Eachine VTX: (200mW) or (25mW)
Eachine CCD:
Or Eachine CCD/VTX set (200mw):
VTX antenna: (RHCP) or (LHCP)
Naze32:
HobbyKing:
Lipo:
Beachfront Celebration - Latinesque by Kevin MacLeod is licensed under a Creative Commons Attribution license (/...)
Source: -...
Artist: /