Foxeer XAT1200M/HS1189/Monster vs Runcam Eagle 16:9

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
After fiddling around for some days I finally found good settings for my Foxeer XAT1200M aka HS1189 aka Foxeer Monster. Here's a comparison with the RunCam Eagle 16:9 in the same low light conditions at dusk. At 3:30 you can see my latest settings for the Foxeer. I still have some kind of "ghosting" in the footage of the Foxeer, but it's only in the DVR. There's nothing in the goggles.
Update: After some more trying I figured out that the ghosting effect is almost gone if I set the TV System to NTSC. PAL setting seems to not work correctly. I tried several TX and RX combinations and three different DVRs, seems to be ok now ... finally.
The stock settings of the Runcam Eagle 16:9 FPV Camera are quite good but the colors look washed out and pale. After turning down the brightness from 44 to 24 colors look much better. Then go into "Image Enhance" to "Sharpness". Set Detail to Manual and value 6, same for "Edge". 3DNR is turned 0 (off). I have changed nothing else and I think it's good now. What do you think?
Foxeer XAT1200/HS1189:
Runcam Eagle 16:9:
Runcam Eagle 4:3 Version is on the way:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.