PART 1: An easy way to make parachutes for dropping from RC aircraft. These are fabricated from nylon (or polyester) "jacket liner" or "garment liner" and "tulle" netting plus parachute cord, hot glue, and shrink tubing. The cost is about $3-5 each. The usual size is 30" diameter and two can be made per yard of material 60" wide. I usually knock out 4 at a time from two yards of material. Up to 60" parachutes are possible.
STAY TUNED FOR:
PART 2 - RELEASE MECHANISM
PART 3 - CARGO AND PARACHUTE RIGGING
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Deathstroke 3d printed wearable mask #shorts
Enduro Rally 2021 - Pabradė military base
SnapMaker J1 IDEX 3d printer - double extruder workflow sample dual head print