HeliPal.com - DJI AVL58 FPV System (TX + RX + Antenna)

The Perfect FPV System for your drone - It's Reliable and GPS Safe!!
For a FPV system our requirement is simple, we want smooth and reliable video feeds on the monitor, that's all. However, it's easier said than done, when we look deeper into FPV System, we found a lot of problems, mostly about frequency jamming on Transmitter signal, GPS signal and the FPV signal, it's a pain to find the perfect solution. Finally we found this DJI AVL58 FPV System can do the job pretty well, it's a 500mw FPV system with stable transmission of radio frequency which means it will not jam GPS signal and Transmitter signal, effective range in open space is about 1000 meters, or 100-200m in city areas, this is more than enough for most people.
This system has a Transmitter and Receiver and a bunch of wires, those wires were made for Go Pro cameras and T-Join batteries. To get the system to work, you will need a Monitor, a Go Pro Hero Camera and Two 11.1V Li-PO Battery, and you need your own Tripod for the Monitor (Otherwise who will hold the camera for you?).
About the monitor, it should have a yellow video RCA connector (sometimes called phono connector or cinch connector) and it should take 12V power, so you can power up the Receiver Module and this Monitor with the same 11.1V Li-Po Battery. We have do something on the transmitter cable (soldered 3S balance plug and a white plug for camera), it should be best for most people.