Dji fpv goggles testing Lumenier AXII 2 and Truerc singularity
DJI goggles test with Lumenier AXII 2 and Truerc singularity antenna.
Ideally id have used a Truerc x air for DJI or the VAS cyclops as both should give far better range and penetration but I expected a bigger improvement than this and based on this I wouldn't recommend anyone bother changing unless they want smaller goggle antenna. Obviously as I fly different spots and conditions things may change and I'll update as they do. I will say the latency seemed fractionally better on the Truerc antenna. I have so far found the system gives me all the range I would use in normal flying.
I was running the Banggod 6” frame on 5” props
1.37 introduction
6 37 DVR of spot
7.16 comparisons
15.42 testing thoughts and rig
Ideally id have used a Truerc x air for DJI or the VAS cyclops as both should give far better range and penetration but I expected a bigger improvement than this and based on this I wouldn't recommend anyone bother changing unless they want smaller goggle antenna. Obviously as I fly different spots and conditions things may change and I'll update as they do. I will say the latency seemed fractionally better on the Truerc antenna. I have so far found the system gives me all the range I would use in normal flying.
I was running the Banggod 6” frame on 5” props
1.37 introduction
6 37 DVR of spot
7.16 comparisons
15.42 testing thoughts and rig
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.