Whoop Plane? - KFPLAN KF606

Table of Contents:
00:38 - Stock plane overview
03:10 - Modified plane overview
05:41 - Roll doesn't work right
06:36 - 'First' flight
07:18 - First successful flight
The plane:
The BIG motors:
The cam/vtx:
Prop option 1:
Prop option 2:
If you really want to try this, you'll need to find a ~40mm or less prop that will fit the 0.8mm shaft on the motor. The whoop props are fine and would work but note that these props are used in 'pusher' configuration so you'll be putting the prop on upside down. So any prop you choose should probably have a mounting hole all the way through. You'll probably need to melt through the hole in the middle of the top end of them with a paper clip then push it on the motor because the top end of the hole is usually narrower.
I know that little whoop plane that uses whoop parts exists. it's just super not great control. about as good as my POS here. I need the gold control.
A toothbrush I'm gonna review when it's back in stock:
▼Join my FB group for more discussion: Kabab FPV
/
▼ My typical 5" quad setup:
-Hyperlite Glide Floss (will be re-released soon)
-Motor 1750kv/ESC combo:
-WaFL’s Cap Cap:
-Battery:
-FC:
-FPV Cam:
-Vtx:
-ND GoPro Mount 30deg:
-ND Filter (if used):
▼Notable motors:
-Xing 2306:
-Xing 2208:
-FANTASTIC 6" motor:
▼ 5" Sub $200 build that's still good
-Frame:
-FC/4in1 Stack:
-Motors:
-Props:
-FPV Cam:
-Vtx:
-Starter goggles:
-Batt pad material:
▼ If you want to solder better:
-Fantastic solder:
-Fantastic iron:
▼ Lighting equipment:
-Ring light:
-Panel light:
-Power adapter:
-Tripod:
-Mini tripod:
▼ Tips?
-PayPal:
-Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
-Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
-ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
-LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG
-Tesla Referal code:
Please use my referral code if you're gonna buy a Tesla. You get some free stuff when you do and I get better status with Tesla.