Micro Tesla Turbine MK2 | Part2 | Housing, End Caps, Nozzle

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
►Subscribe!
►T-shirts & Hoodies!
This is part 2 of the micro Tesla turbine mk2 building series. It took way longer than I was expecting, due to the fact that I had to rebuilt the rotor. I run into some issues while making it and the one you see on the video is practically the 4th rotor (and succesful) and each one was taking roughly 4-5 days to make. The new rotor has 22 total discs (instead of 18 that the original had). The most important thing though (and the reason that I had to remake it) was the spacers between the discs that are held in the 4 supporting tubes, which are way small in diameter thatn the original ones (1.9mm vs 7mm) allowing more airflow between the discs and thus increacing the boundary layer effect. I didn't finish the build on this part because the video is already lenghty and I didn't want to make you lose interest
Support my videos!:
Subscribe to my channel!
Follow me on Vessel and watch my video earlier!
Follow me on Google+
Follow me on Twitter!
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.