HQ Ethix S3, My Setup Concepts, Frame Update, more....

Table of Contents:
00:22 - A look at 4S and 6S
03:16 - Connector issue!!!
04:51 - Frame progress update
11:46 - All the props...
20:01 - HQ 5.1x4.1x3
24:15 - HQ Ethix S3 Prop
28:34 - My quad setups...
33:23 - Throttle drop issue
No ND filters used in any videos.
I was driving the Prius because it rained...a little.
Does anyone know if these motors have 9mm bearings?:
I ordered the Kester Solder. Hopefully that will fix my jank.
Thanks everyone.
Side Force Generators (awesome concept):
HQ Ethix S3 Prop: ,
I recommend running these on 2306, 2207, 2208 1800-1850kv 6S or 2600-2700kv 4S with an AUW of under 650g. 1700kv is good too but a little more kv is just a little better :-)
Things I like:
Micro Eagle -
My preferred FPV cam still
Rush Tank Vtx -
One of many good Vtx's. I like it because it works well and fits my build style
WaFL’s Cap Cap
/
TinyHawk!: ,
My TinyHawk tune:
First off, set your landing/warning voltage to 2.9v and your warning voltage to 3.2v. This is a non-issue with 1S as you can't really pull enough amps on this thing to actually damage the battery much.
Make sure it's set to 8k/8k and I recommend Multishot with min throttle at 1175 because Turtle mode doesn't even work for now. They're working on a quad blade prop that will Turtle and a new frame with prop guard spars that are more robust.
Roll and Pitch are the same numbers: P 80, I 55, D 46 FF 45, RC Rate 1.32, rest default Betaflight
Yaw: P 60, I 60, D 0, FF 45, RC Rate 1.32, rest default
Iterm relax on and on defaults, the other three switches above it off.
Tips?
Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG