6S 2", Just check the table of contents plz thx

Table of Contents:
00:53 - 6S 2" anticlimactic
06:00 - 4S vs 6S on same quad
07:07 - GoPro setting findings
09:41 - motor wire connector?
11:34 - TinyHawk update
14:24 - 1S 2.5" micro...
16:21 - My soldering SUCKS! dunno why :-(
I'm torn on whether I should pick up a set of these. They're so pretty. They come in 1800kv but I really wish they were a 2208:
TS100 iron: , ,
TS80 iron:
The Micro King:
iFlight 1108:
These motors perform really well and I'd recommend the 5000kv for 2.5" 4S and 6000kv for 2.5" 3S and crazy 4S. Some have had durability issues where the motor cracks off the base however. I have not had such issue and I cracked into a tree pretty hard once as you can see from the folded props.
Things I like:
Micro Eagle -
My preferred FPV cam still
Rush Tank Vtx -
One of many good Vtx's. I like it because it works well and fits my build style
WaFL’s Cap Cap
/
TinyHawk!: ,
My TinyHawk tune:
First off, set your landing/warning voltage to 2.9v and your warning voltage to 3.2v. This is a non-issue with 1S as you can't really pull enough amps on this thing to actually damage the battery much.
Make sure it's set to 8k/8k and I recommend Multishot with min throttle at 1175
Roll and Pitch are the same numbers: P 80, I 55, D 46 FF 45, RC Rate 1.32, rest default
Yaw: P 60, I 60, D 0, FF 45, RC Rate 1.32, rest default
Iterm relax on and on defaults, the other three switches above it off.
Tips?
Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG