Proboat Impulse 9 - 3D printed Jet Drive
Here`s a video of my Impulse 9 with a 3D printed JetDrive that I constructed for the Proboat Impuls and also the Ripmax/Joysway Magic Vee as well as the Jamara Light Wave.
The hulls of the Impulse and the Magic Vee/Light Wave are slightly different so i had to make 2 versions of the jet. The impulse jet, which I got printed mostly in brass, is allready tested a lot and runs really awesome. On the Magic Vee I am running the same jet but with all parts printed in "Strong and Flexible" which is laser sinthered Nylon which also works great and even the printed Nylon propeller holds up to the brushless outrunner on 3S just fine!
The "Strong and Flexible" material is NOT watertight so it has to be painted with acrylic paint when using it for boat parts that need to seal. The Jet has an integrated watercooling system for the motor, but I have not tested yet if it really needs to be watercooled as the motor that I use has way more torque than the little 12mm jet needs.
My Setup:
Hacker A10-12S
3x Hubsan 380mah Lipo in series (to get 3S lipo that fits)
Robbe Roxxy BLControl 908
Hitec HS-45HB
More info, video running in the creek and a link to the 3D Files to print your own coming soon.
The hulls of the Impulse and the Magic Vee/Light Wave are slightly different so i had to make 2 versions of the jet. The impulse jet, which I got printed mostly in brass, is allready tested a lot and runs really awesome. On the Magic Vee I am running the same jet but with all parts printed in "Strong and Flexible" which is laser sinthered Nylon which also works great and even the printed Nylon propeller holds up to the brushless outrunner on 3S just fine!
The "Strong and Flexible" material is NOT watertight so it has to be painted with acrylic paint when using it for boat parts that need to seal. The Jet has an integrated watercooling system for the motor, but I have not tested yet if it really needs to be watercooled as the motor that I use has way more torque than the little 12mm jet needs.
My Setup:
Hacker A10-12S
3x Hubsan 380mah Lipo in series (to get 3S lipo that fits)
Robbe Roxxy BLControl 908
Hitec HS-45HB
More info, video running in the creek and a link to the 3D Files to print your own coming soon.
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.