DIY 5S 1000mah 65C Graphene Pack

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
There has been a lot of talk about flying 5S in the last days but there are just really not that many options for good 5S Lipos at the market.
So I bought a nice 2S and a 3S Turnigy Graphene with matching capacity and C (1000 mah, 65C) rating and combined them to a 5S Pack.
Be sure you did the research and fully understand how a Lipo and the balancer plug are wired before you start messing with it.
Also keep in mind that Lipos have a tendency to explode if you short them so be careful and double check every step!
The size of my 5S 1000mah pack is pretty much the same as a 1300mah 4S Graphene, and only around 10g heavier.
Here are the links to what I used:
2S 1000mah Graphene:
3S 1000mah Graphene:
male 5S JST-XH plugs:
Heat Shrink:
any 50mm diameter Heat Shrink will do, the soft one feels better and takes more abuse.
This here explains how the Lipo and Balancer are wired up:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.