XUAV One Part 2 - unique FPV Plane reviewed in hangar
See this nice plane in my hangar, a few build tips and closeups. Find lots of infos in description! PART1:
X-AUV One plane:
Arkbird OSD/AP:
►EQUIPMENT:
►►find infos on all my copters here in my Hangar:
Hangar filmed with: Panasonic GX8 + 28mm F2.5
►Infos
Buildlog from the MFM Material version with some good tips:
another Buildlog from SchumiXD of the EPO Version (the same as what I'm testing):
Buildlog:
hotglue the servos
glued vtail foam into plastic parts and carbon rod with hotglue
screw on the V-tail fins (secure servoconnectors with tape inside the tail-boom!)
mounted the 3536 1800kv turnigy motor (was easy fit there)
add grease into gearbox (crane grease)
used 60amp Turnigy plush ESC - plenty of space - ESC cables routed outside through air flow
add linkage to servoarms
currently use 5channels directly on radio, later add autopilot
first tries with fixed styrofoam nose - later installing FPV cam on 2axis gimbal (to look around)
(roll axis? to stabilized image - but this is useless with servos - one would need a brusless gimbal - so roll servo is useless IMHO)
CG: to achieve proper CG (around 75mm from LE) I had to move the battery (5200mah 4cell 433gr) all the way forward, did even carve out some more foam from the nose itself - so battery sticks a few cm in the nose). Also added some dead weight directly in the nose ~ 100gr) and the Runcam2 ontop the nose.
Brand:X-uav
Item: ONE EPO FPV Aircraft Kit
Material:EPO
Propeller:12x6 inch Folding Propeller
Wingspan: 1800mm (71inch)
Length: 1078mm (42.5 inch)
Wing area: 38.2dm2(592sq.in)
Empty weight: 750g
CoG: in middle of wing, 65-80mm from leading edge CG: about 76mm from LE
Flying Weight: 1360g(23lb) Standard, max:2kg
Wingload: 35.6g/dm2 (11.7oz/sq.ft)
Take-off Weight:2000~2500g
Features:
- Deluxe Editon with glassfiber inner board and 3K Carbon Tube.
- With two-axis servo gimbal that suits mini HD camera, easy to control and stable.
- Propeller Design: Complete new-power structure,will be lower the attack and resistance.
Recommend Drive System:
Motor: 2814(3536) KV1800
ESC: 30A/40A
Servos: 6x 9g metal gear servos
Battery:4S 14.8V 4000-8000 mAh Lipo
related Playlists:
►my TOP Videos:
►Teamflying, FPV Meetings
►Product Reviews:
►SUBSCRIBE:
►FACEBOOK me:
►visit my BLOG:
X-AUV One plane:
Arkbird OSD/AP:
►EQUIPMENT:
►►find infos on all my copters here in my Hangar:
Hangar filmed with: Panasonic GX8 + 28mm F2.5
►Infos
Buildlog from the MFM Material version with some good tips:
another Buildlog from SchumiXD of the EPO Version (the same as what I'm testing):
Buildlog:
hotglue the servos
glued vtail foam into plastic parts and carbon rod with hotglue
screw on the V-tail fins (secure servoconnectors with tape inside the tail-boom!)
mounted the 3536 1800kv turnigy motor (was easy fit there)
add grease into gearbox (crane grease)
used 60amp Turnigy plush ESC - plenty of space - ESC cables routed outside through air flow
add linkage to servoarms
currently use 5channels directly on radio, later add autopilot
first tries with fixed styrofoam nose - later installing FPV cam on 2axis gimbal (to look around)
(roll axis? to stabilized image - but this is useless with servos - one would need a brusless gimbal - so roll servo is useless IMHO)
CG: to achieve proper CG (around 75mm from LE) I had to move the battery (5200mah 4cell 433gr) all the way forward, did even carve out some more foam from the nose itself - so battery sticks a few cm in the nose). Also added some dead weight directly in the nose ~ 100gr) and the Runcam2 ontop the nose.
Brand:X-uav
Item: ONE EPO FPV Aircraft Kit
Material:EPO
Propeller:12x6 inch Folding Propeller
Wingspan: 1800mm (71inch)
Length: 1078mm (42.5 inch)
Wing area: 38.2dm2(592sq.in)
Empty weight: 750g
CoG: in middle of wing, 65-80mm from leading edge CG: about 76mm from LE
Flying Weight: 1360g(23lb) Standard, max:2kg
Wingload: 35.6g/dm2 (11.7oz/sq.ft)
Take-off Weight:2000~2500g
Features:
- Deluxe Editon with glassfiber inner board and 3K Carbon Tube.
- With two-axis servo gimbal that suits mini HD camera, easy to control and stable.
- Propeller Design: Complete new-power structure,will be lower the attack and resistance.
Recommend Drive System:
Motor: 2814(3536) KV1800
ESC: 30A/40A
Servos: 6x 9g metal gear servos
Battery:4S 14.8V 4000-8000 mAh Lipo
related Playlists:
►my TOP Videos:
►Teamflying, FPV Meetings
►Product Reviews:
►SUBSCRIBE:
►FACEBOOK me:
►visit my BLOG:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.