URUAV UR65 Is it really that Good

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
UR65 Link:-
Mobile Link
Snapper7 Link
Snapper6
Support Grumpy Trev on Patreon
Snapper7 video
Snapper6 Video
******************************************************************************
Package Inlcuded:
Basic Version
1 x 65mm Brushless whoop Frame
1 x Crazybee F3 FC (Frsky and Flysky option)
1 x 5A 4in1 ESC
4 x SE0603 KV17000 Motor
1 x 31mm propeller(4cw+4ccw)
1 x AIO Camera & VTX
1 x 3.8v 250mah 30C/60C battery
1 x USB Lipo/LIHV Charger
1 x Propeller disassemble tool
1 x Screwdriver
******************************************************************************
Standard Version
1 x 65mm Brushless whoop Frame
1 x Crazybee F3 FC (Frsky and Flysky option)
1 x 5A 4in1 ESC
4 x SE0603 KV17000 Motor
1 x 31mm propeller(4cw+4ccw)
1 x AIO Camera & VTX
3 x 3.8v 250mah 30C/60C battery
1 x 1S06 6 way Lipo/LIHV charger
1 x Propeller disassemble tool
1 x Screwdriver
******************************************************************************
Specification:
Brand Name: URUAV
Mode Name: UR65
Item Name: 1S 65mm Brushless Whoop racer drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: 20.5g(without battery)
Weight:27g(with Original 250mah lipo battery)
******************************************************************************
Firmware: Betaflight_3.3.0_Crazybee
Betaflight target:
CRAZYBEEF3FR(Frsky version)
CRAZYBEEF3FS(Flysky version)
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry(D8/D16 switchable)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
******************************************************************************
Onboard 5A 4 In 1 ESC
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Default protocol: DSHOT600
******************************************************************************
Onboard Frsky Receiver Version ( Optional)
SPI BUS receiver
Frsky D8/D16 switchable
Compatible both D8 and D16 transmitter
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
******************************************************************************
Onboaed Flysky Receiver Version ( Optional)
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
******************************************************************************
SE0603 KV17000 Motor
Mode: SE0603 KV17000
Configu-ration:9N12P
Stator Diamter:6mm
Stator Length:3mm
Shaft Diameter:Φ0.8mm
Motor Dimension(Dia.*Len):Φ9mm*15.5mm
Weight(g):1.8g
No.of Cells(Lipo):1S
******************************************************************************
5.8G VTX AIO Camera
Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9"12.0mm ( L*W )
Weight: 3g
******************************************************************************
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx7mm
Weight: 6.5g
Connector: PH2.0
******************************************************************************
********************************
FYI
These are affiliate or campaign links and the above product was sent for free.
If you dont like it, feel free to just google search the product or store and
get the link that way. But if it doesn’t bother you these links help support
the channel and also help vendors track the impact of my videos.
******************************************************************************
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.