Low cost miniquad racing drone build video PART 1
In part 1 of the low-cost racing miniquad drone build video I look at the "bill of materials" needed to construct your own FPV racing mini quadcopter based on the ZMR250 frame.
Materials:
- the ZMR250 frame fiberglass version
or carbon version:
- DYS BE1806/2300KV motors from Banggood:
or from HobbyKing:
- HobbyKing Afro 12A ESC
- Gemfan 5x3 propellers from Banggood
or HobbyKing:
- Naze32 flight controller (unsoldered)
or pre-soldered:
- 600TVL SuperHAD II FPV camera with WDR from Surveilzone:
or from SecurityCamera2000
(Note: I will update this list shortly with more components and sources so don't order just yet)
Materials:
- the ZMR250 frame fiberglass version
or carbon version:
- DYS BE1806/2300KV motors from Banggood:
or from HobbyKing:
- HobbyKing Afro 12A ESC
- Gemfan 5x3 propellers from Banggood
or HobbyKing:
- Naze32 flight controller (unsoldered)
or pre-soldered:
- 600TVL SuperHAD II FPV camera with WDR from Surveilzone:
or from SecurityCamera2000
(Note: I will update this list shortly with more components and sources so don't order just yet)
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.