QAV250 FPV - windy day @ Cornfield - Windmills |HD|
Found a new neat spot for fpv flying, it was quite windy this day, 13mph NNO. I did try some different PID settings, work fine.
Setup:
Lumenier QAV250 (ready to fly)
Flight Control: OpenPilot CC3D
Motors: EMAX 2280kv MT1806
Props: 5" gemfan 5x3
ESC: 12amp Lumenier w/ SimonK firmware
Immersion RC 600mW 5.8ghz vtx
Frsky X8R receiver w/ amplified PCB antenna
Lumenier 1300mah 3s lipo
FrSky Taranis 2.4ghz transmitter
Fatshark Attitude SD V2 FPV goggles + FPV cam
mobius action cam 1080 30fps w/ wide angle lens
no name cloverleaf and skew planar wheel antennas
Setup:
Lumenier QAV250 (ready to fly)
Flight Control: OpenPilot CC3D
Motors: EMAX 2280kv MT1806
Props: 5" gemfan 5x3
ESC: 12amp Lumenier w/ SimonK firmware
Immersion RC 600mW 5.8ghz vtx
Frsky X8R receiver w/ amplified PCB antenna
Lumenier 1300mah 3s lipo
FrSky Taranis 2.4ghz transmitter
Fatshark Attitude SD V2 FPV goggles + FPV cam
mobius action cam 1080 30fps w/ wide angle lens
no name cloverleaf and skew planar wheel antennas
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.