FMS F-15 EDF Hand Launch Crash
I picked up a new FMS F-15 EDF because I’ve saw a video where it was being used as a belly lander. The tiny landing gear that comes on these small EDF jets can’t handle the thick, longish grass on our field so it was nice to find a cool looking EDF that I could belly land.
I flew the maiden and trimmed it out (almost no trim required). It flew great! It was faster than I expected given that it runs on a 3s 2200. The roll rate was excellent too. I loved the way it looked in the air!
When doing my landing for the maiden flight, I was going to do a flop landing but came in a bit too hot and just set her down like you would for a normal belly landing. The ailerons tore off. I guess that even though the aileron's control horns sit up quite high on the fuse, they must have snagged the grass and ripped off the ailerons.
The ailerons were easily repaired using Hangar 9 CA hinges she was back in the air. No more issues.
Finally, a nice day presented itself and it was off to the field. I gave the radio to Paul who is a friend and an excellent pilot. Paul was there to fly the F-15 for me so I could catch it on video. I launched it for him and he did a “getting used to it flight”. The flight went very well indeed. Time to do a video!
Paul was on the transmitter, I was on the camera and we had one of our buddies launch the plane.
As you’ll see in the video, the launch didn’t go as well as we had hoped for.
I’ll see if I can get her patched up and back in the air for the video that could have been……
Take care and happy flying!
Cheers,
Bob
A few specs:
Wingspan 710mm / 28.0in
Length 960mm / 37.8in
Flying Weight 660g
Power System 2627-KV5100 Brushless Motor
Speed Control 50A ESC, T Connector
Propeller / EDF 64mm EDF
Servos 9g x 5
Landing Gear Fixed main gear, steerable nose gear
Required Battery 11.1V 2200mAh 30C 3 cell LiPo
Required Radio 4 Channel
Rudder No
Flaps No
Ailerons Yes
Lights No
Hinge Type Foam
Material EPO Foam
A link to the plane: /
The Royalty Free Music is from YouTube’s Audio Library and includes:
Ever Felt pt.1
by Otis McDonald
and
Phase Three
By Huma-Huma
I flew the maiden and trimmed it out (almost no trim required). It flew great! It was faster than I expected given that it runs on a 3s 2200. The roll rate was excellent too. I loved the way it looked in the air!
When doing my landing for the maiden flight, I was going to do a flop landing but came in a bit too hot and just set her down like you would for a normal belly landing. The ailerons tore off. I guess that even though the aileron's control horns sit up quite high on the fuse, they must have snagged the grass and ripped off the ailerons.
The ailerons were easily repaired using Hangar 9 CA hinges she was back in the air. No more issues.
Finally, a nice day presented itself and it was off to the field. I gave the radio to Paul who is a friend and an excellent pilot. Paul was there to fly the F-15 for me so I could catch it on video. I launched it for him and he did a “getting used to it flight”. The flight went very well indeed. Time to do a video!
Paul was on the transmitter, I was on the camera and we had one of our buddies launch the plane.
As you’ll see in the video, the launch didn’t go as well as we had hoped for.
I’ll see if I can get her patched up and back in the air for the video that could have been……
Take care and happy flying!
Cheers,
Bob
A few specs:
Wingspan 710mm / 28.0in
Length 960mm / 37.8in
Flying Weight 660g
Power System 2627-KV5100 Brushless Motor
Speed Control 50A ESC, T Connector
Propeller / EDF 64mm EDF
Servos 9g x 5
Landing Gear Fixed main gear, steerable nose gear
Required Battery 11.1V 2200mAh 30C 3 cell LiPo
Required Radio 4 Channel
Rudder No
Flaps No
Ailerons Yes
Lights No
Hinge Type Foam
Material EPO Foam
A link to the plane: /
The Royalty Free Music is from YouTube’s Audio Library and includes:
Ever Felt pt.1
by Otis McDonald
and
Phase Three
By Huma-Huma
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.