Holybro Shuriken 180 Pro - Maiden Test

I got a chance to test this "BNF" Miniquad and Leopard 4S Battery 1300mAh 95C from
Just bind it, I did a little tuning on pids to suit my thumbs, put the battery on, and fly! :-D
Note: I noticed there is a little vibrations on CCD Camera because it touch the top plate.
Description:
Brand Name : Holybro
Item Name : Shuriken 180 Pro
Wheelbase: 180mm
Upper board: 2.5mm thick full carbon fiber
Lower board: 1.6mm PCB
Dimension : 210*215*45mm
Weight : 355g
Specifications:
Receiver Options
FrSky 16CH receiver, compatible with TARANIS
DSMX 6CH receiver, compatible with DX6i,DX7,DX8,DX9
Futaba 14CH receiver, compatible with T8FG, T14FG, 12Z, T18MZ
F3 32-bit Flight Controller
Processor: 32-bit STM32F303CCT6 with 256KB flash
MPU6050 gyro / accelerometer
2205 Brushless Motor
KV: 2750
Voltage input: 3 - 4S LiPo
BLHeli 30A ESC
Oneshot125: yes
Camera
Sensor: 1/3 inch Super HAD II CCD
TV system: PAL
Resolution: 600TVL
Lens: 2.5mm
Video Transmitter
Frequency: 5.8GHz
Channels: 40
Power: 25mW / 600mW switchable
Features :
Race32 F3 32-bit Flight Controller
5.8GHz, 25/600mw switchable, 40 Channel
Integrated PDB with Fiberglass-reinforced Heatsink Bottom Plate
OneShot125 30A / 40A burst ESC's
2205-2750kv Motors
1/3 SONY Super HAD II CCD, PAL, 600TVL Camera, 2.5mm Lens
3K Single-weave 2.5mm Carbon Fiber Top Plate
Bind and fly , 3 types of receiver avaliable
180mm, 4040-4blade , 370g
BetaFlight Pre-loaded
Recommanded Part (not included):
Battery
Transmitter
Package Included :
1 x Shuriken 180 Pro Racer
1 x F3 FC
1 x Receiver
1 x 600TVL Camera
1 x 5.8G VTX
1 x 5.8G 4 leaf antenna
8 x 4040 4-blade propeller
2 x Battery Strap