Description:
SP Racing F3 is designed to give awesome flight performance based on tried and tested sensors while also providing unparalleled I/O capabilities.
Compared to ACRO version, the DELUXE one is quite impressing with 10DOF, always-on I2C port for OLED display and bigger cache memory of the CPU.
Main Features:
- Next-generation CPU contributes to faster calculations and shorter loop time
The STM32F3 CPU supports next-generation processor, efficient hardware floating-point operations, and faster ARM Cortex - M4 core computing.
- Outstanding multitasking with no-compromise I/O
Use all the features simultaneously! It is possible to connect your OSD, SmartPort, SBu, GPS, LED strip, battery monitoring, sonar, and 8 motors at the same time!
- Easily achievable improvements of setup with the help of flight logs
The on-board high-capacity black box records the flight logs, which can be used to optimize your tuning and to see the results of your setup without guesswork.
- OneShot ESC and programmable LEDs
Fully supporting OneShot, it also features easy PID tuning and a sharper response. The multi-colored LED strips are great for FPV racing, line-of-sight flying and night flying.
- Ideal for steady flight
The SP Racing F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly as if it is on rails.
- Configurable
The SP Racing F3 runs Cleanflight which can be configured to suit your needs via a cross-platform GUI (Windows / OSX / Linux).
- Developer friendly
Developer friendly debug port (SWD), boot mode selection, and unbrickable bootloader are available, thus, opening the way for upgrades.
- Broad RC receiver support
It supports SBus, SumH, SumD, Spektrum1024 / 2048, XBus, PPM, PWM receivers, and requires no external inverter.
- Suitable for 250, 280, 180, 210mm FPV racing quadcopter
SP Racing F3 is designed to give awesome flight performance based on tried and tested sensors while also providing unparalleled I/O capabilities.
Compared to ACRO version, the DELUXE one is quite impressing with 10DOF, always-on I2C port for OLED display and bigger cache memory of the CPU.
Main Features:
- Next-generation CPU contributes to faster calculations and shorter loop time
The STM32F3 CPU supports next-generation processor, efficient hardware floating-point operations, and faster ARM Cortex - M4 core computing.
- Outstanding multitasking with no-compromise I/O
Use all the features simultaneously! It is possible to connect your OSD, SmartPort, SBu, GPS, LED strip, battery monitoring, sonar, and 8 motors at the same time!
- Easily achievable improvements of setup with the help of flight logs
The on-board high-capacity black box records the flight logs, which can be used to optimize your tuning and to see the results of your setup without guesswork.
- OneShot ESC and programmable LEDs
Fully supporting OneShot, it also features easy PID tuning and a sharper response. The multi-colored LED strips are great for FPV racing, line-of-sight flying and night flying.
- Ideal for steady flight
The SP Racing F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly as if it is on rails.
- Configurable
The SP Racing F3 runs Cleanflight which can be configured to suit your needs via a cross-platform GUI (Windows / OSX / Linux).
- Developer friendly
Developer friendly debug port (SWD), boot mode selection, and unbrickable bootloader are available, thus, opening the way for upgrades.
- Broad RC receiver support
It supports SBus, SumH, SumD, Spektrum1024 / 2048, XBus, PPM, PWM receivers, and requires no external inverter.
- Suitable for 250, 280, 180, 210mm FPV racing quadcopter
Specifications
General |
Type: Flight Controller |
|---|---|
Dimension and Weight |
Product weight: 0.026 kg
Package weight: 0.035 kg Product size (L x W x H): 3.70 x 3.70 x 1.20 cm / 1.46 x 1.46 x 0.47 inches Package size (L x W x H): 16.00 x 10.00 x 1.00 cm / 6.3 x 3.94 x 0.39 inches |
Package Contents |
Package Contents: 1 x Flight Controller, 3 x Cable, 4 x Pin, 1 x Panel |
