Micro Scisky 32bits Brushed Flight Control Board Based On Naze32 With 1.25mm Plugs DIY Quadcopter
This Brushed Flight Control Board comes with 1.25mm 2 pin JST plugs/connectors.
Description: For firmware flash manual
Size: 20.0*33.5*6.0mm (not including the USB protruding part)
Size: 20.0*33.5*6.0mm (not including the USB protruding part)
Weight: 2.5g (including DSM2 compatible 7CH receiver, serial port output)
Frequency for driving motor: 2000 (the frequency can be set up by user, max frequency can be 32K)
Brushed ESC: continuous working current is 3.5A, max current is 5A(5S)
Feature:
Integrated with DCDC voltage booster circuit( output 5.0V/500Ma), it can supply power for other device through IIC and UART port
Integrated with DCDC voltage booster circuit( output 5.0V/500Ma), it can supply power for other device through IIC and UART port
The hardware of the FC is based on Naze 32, test firmware is cleanflight Naze V1.9.0 and V1.8.1.
Noting:
It will enters binding mode only after powered of 10 seconds automatically, you need to try to get transmitter closer to the board
something like 5cm will be better. No binding button on the board.
The following parts are suitable for this flgiht control board: (not included)
Frame Kit: 110mm Carbon Fiber Frame kit
120mm Carbon Fiber Frame kit
90mm Carbon Fiber Frame Kit
122mm DIY Micro Mini PCB Frame Kit
130mm Carbon Fiber Frame Kit
Propeller: Eachine 75mm Blade Propeller
Eachine 55mm Blade Propeller
Motor: Chaoli CL 720/820 Coreless Motor
Package Include:something like 5cm will be better. No binding button on the board.
The following parts are suitable for this flgiht control board: (not included)
Frame Kit: 110mm Carbon Fiber Frame kit
120mm Carbon Fiber Frame kit
90mm Carbon Fiber Frame Kit
122mm DIY Micro Mini PCB Frame Kit
130mm Carbon Fiber Frame Kit
Propeller: Eachine 75mm Blade Propeller
Eachine 55mm Blade Propeller
Motor: Chaoli CL 720/820 Coreless Motor
1 x 32bits Brushed Flight Control Board (With 1.25mm Plugs)
