<br />
NiMH Charge Rate: Up to 5.0 Amps (50 Watts Max)<br />
Power Output: 50 Watts<br />
Charge Rate: Up to 1.5C<br />
Battery Type: LiPo 2S to 6S (Series)/NiMH 1 to 15 Cells<br />
<br />
Connections:<br />
<br />
1.Connect the charger to its power source, using either the AC power cord or the DC power cord provided. When<br />
connected to power, the charger will make a single audible tone and the LiPo Status LED will illuminate green.<br />
When connecting to a DC power source, make sure to observe connect polarity-red to positive and black to negative. Do not connect both power inputs to the charger at the same time!<br />
2.Plug the output power adapter cord into the output power ports of the charger, making sure to observe correct polarity (red to red and black to black).<br />
3.Plug your battery into the output power adapter cord. If you’re charging a LiPo battery, plug its balance connector into the matching balance port on the charger, too.<br />
Depending on the power connector on your battery, you may need to use an adapter or change the connector to match. In addition, if your LiPo battery does not feature an XH balance connector, an adapter board can be used.<br />
<br />
Features:<br />
<br />
1.Automatic detection of battery cell count and capacity.<br />
2.Automatically sets charge output.<br />
3.Integrated cell voltage balancer for Lipo batteries.<br />
4.Highly accurate LiPo Balance Charging+/-0.01V<br />
5.High-power, high performance charge circuit.<br />
6.XH-Style LiPo balance ports.<br />
<br />
Warnings:<br />
<br />
1.Only use the charger with LiPo or NiMH battery types. Do not attempt to charge any other battery type. This charger is not compatible with LiFe, Lilo or NiCd batteries.<br />
2.Observe any cautions and warnings included with your battery.<br />
3.Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.<br />
4.Keep the charger away from moisture, dust, dirt, heat, direct sunlight and vibration. Do not drop it.<br />
5.The charger is designed to be powered by an 11 to 18V DC or 100 to 240V AC power source only. Do not connect both power inputs to the charger at the same time!<br />
6.Double-check all connections prior to starting the charge process. Do not connect with reverse polarity.<br />
7.The charger and the battery to be charged should be placed on a heat-resistant, non-flammable and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.<br />
8.When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.<br />
9.Never charge a LiPo battery that is swollen in any way.<br />
10.To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.<br />
<br />
Package Includes:<br />
<br />
1 x iMaxRC B6AC Compact Charger<br />
1 x AC Input Cord<br />
1 x DC Input Cord<br />
1 x Output Cord<br />
1 x Instruction manual<br />
<br />
</div>
<div class="clear clearfix"></div>
<div class="shopButtons">
<hr class="short">
<div class="add2Btns">
</div>
<div class="clear"></div>
</div>
</div>
<div class="clear clearfix"></div>
<div class="separator"></div>
<div id="similar">
<div class="clear clearfix"></div>
<div class="moreSimilar">
<h2>More similar</h2>
<hr class="short">
<div class="row">
<div class="grid_4" style=" ">
<div class="item">
<a href="https://www.fpvracer.lt/model/yw-22-2v-2200mah-25c-lipo-battery-t-plug-xt60-plug-for-rc-model-11813.html" class="thumb">
<img src="/uploads/modules/catalog/img/11000/1462224875_298_yw-22-2v-2200mah-25c-lipo-battery-t-plug-xt60-plug-for-rc-model.jpg" alt="YW 22.2V 2200mAh 25C Lipo Battery T Plug XT60 Plug for RC Model"/></a>
<br/>
<a href="https://www.fpvracer.lt/model/yw-22-2v-2200mah-25c-lipo-battery-t-plug-xt60-plug-for-rc-model-11813.html" class="title">
YW 22.2V 2200mAh 25C Lipo Battery T Plug XT60 Plug for RC Model </a>
<div class="content-icons">
<span class="price">29.49 €</span>
</div>
<div class="clear"></div>
</div>
</div>
<div class="grid_4 clearfix">
<div class="text-center padding-top-sm padding-bottom-sm clearfix">
<!-- -->
<script>
document.write(){kind=spacer}
');
(adsbygoogle = window.adsbygoogle || []).push({});
IMAX B6AC 50W 5A Compact Charger For 2S-6S Lipo NiMh RC Car Boat - 34.11 €
');
(adsbygoogle = window.adsbygoogle || []).push({});
');
(adsbygoogle = window.adsbygoogle || []).push({});
