FullSpeed 20x20mm FSD TX600 5.8G 40CH PIT/25/100/200/400/600mW FPV Transmitter Support BFOSD Control - 20.00 €

FullSpeed 20x20mm FSD TX600 5.8G 40CH PIT/25/100/200/400/600mW FPV Transmitter Support BFOSD Control
Seller: Banggood,
Free shipping aviable, Registered postage from 25 €


FullSpeed 20x20mm FSD TX600 5.8G 40CH PIT/25/100/200/400/600mW PV Transmitter Support BFOSD Control

Specification: ( Manual )
Brand Name: Fullspeed
Model: FSD TX600
Item Name: 5.8G 40CH PIT/25/100/200/400/600mW PV Transmitter
Channel: 40CH
Power: 25/100/200/400/600mW ( Switchable)
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
(TX600's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations
if you need to unlock the frequency.)
Control mode: BFOSD control(RX) / Button
BAT: 5V
Video System: NTSC/PAL
Antenna: IPEX
Size: 26x26mm
Mounting Hole: 20x20mm
Weight: 2.3g

Features:
- 25/100/200/400/600mW switchable
- Small size and Light weight
- Build-in PIT mode
- Smart Port
- Frequency lock on
- Clean filtering, interfere rejection ability
- Won't interfere with other VTX while it's powering up in different frequency

Frequency Table:

Channel 1 2 3 4 5 6 7 8
Band A 5865 5845 5825 5805 5785 5765 5745 5725
Band B 5733 5752 5771 5790 5809 5828 5847 5866
Band E 5705 5685 5665 5645 5885 5905 5925 5945
FS 5740 5760 5780 5800 5820 5840 5860 5880
Race Band 5658 5695 5732 5769 5806 5843 5880 5917
Low Race 5362 5399 5436 5473 5510 5547 5584 5621

Notice: Red area on aboved frequency table is locked area. Long press for 20S to unlock or reset all set up. Pls re-power after unlocking.

Setting:
Red Light: Channel
Green Light: Band
Bule Light: Power

1. Press and hold button for 5S entering into CH. Red light will flash 3 times and show the Chnnel.
Short press button for 1S to change CH.

2. Press and hold button for 5S entering into Band.Green light will flash 3 times and show the Band.
Short press button for 1S to change Band

3. Press and hold button for 5S entering into Power. Blue light will flash 3 times and show the Power.
Short press button for 1S to change Power.
(only to unlock the transmitter so the power select mode can accessible)

4. Press and hold button for 5S to save setting. All LED will falsh 3 times to show CH, band and power.

Package Included:
1x 40CH 25/100/200/400/600mW VTX Module
1x IPEX Antenna







Add Comment