Creality CR-10S PRO | Review | Fixes | Upgrades!
PRODUCT LINK: Discount Code: GB3DCRP
So after a good month of using this new Creality printer it's time to draw some conclusions and look at the fixes and upgrades that are working well for me. Lots of Links to things discussed in the video are below..
TPU:
PLA:
PETG:
Tiny Machines Firmware:
Tiny Machines ABL Levelling guide:
Inductive Sensor:
Z timing belt mod:
Better gantry levelling shims:
The Hero Me cooler im using:
40mm silent fans:
Step Down voltage converters:
The main board 40mm fan cooling plate:
Support me through affiliate links if you like, it really helps me out :)
GEARBEST:
Or help me out directly here:
paypal.me/NJTechfpv
So after a good month of using this new Creality printer it's time to draw some conclusions and look at the fixes and upgrades that are working well for me. Lots of Links to things discussed in the video are below..
TPU:
PLA:
PETG:
Tiny Machines Firmware:
Tiny Machines ABL Levelling guide:
Inductive Sensor:
Z timing belt mod:
Better gantry levelling shims:
The Hero Me cooler im using:
40mm silent fans:
Step Down voltage converters:
The main board 40mm fan cooling plate:
Support me through affiliate links if you like, it really helps me out :)
GEARBEST:
Or help me out directly here:
paypal.me/NJTechfpv
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.