How to Build a Swing Set | Ask This Old House

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
Ask This Old House general contractor Tom Silva travels to Colorado to help a couple build a DIY swing set for their young son.
SUBSCRIBE to This Old House:
Time: 4-5 hours
Cost: $1000 and up
Skill Level: Moderate
Tools List for Building a Swing Set:
Measuring tape
Speed square
Drill driver
Hammer
Flathead screwdriver
Wrench set
Shopping List:
DIY Play Set kit
Play set kit accessories
Lumber for swing set frame
4” screws
Steps:
1. Measure and mark the locations of the holes for all the swing set accessories across the top beam of swing set.
2. Drill holes all the way through the beam on the marks. It’s important to keep the holes straight, so use a speed square to guide the drill bit.
3. Flip the beam over and insert the T-nuts that come with the play set kit with a hammer.
4. Insert the washers over the brackets for the swings and thread those through the holes into the T-nuts. These also come with the kit. Eventually, you won’t be able to hand tighten anymore, but you can use a screwdriver in the hole of the bracket as leverage to get it the rest of the way down. Be sure to keep the orientation of the hole perpendicular to the beam.
5. Drill the washers into the beam using the drill driver and the provided screws.
6. Assemble the A-frames of the playset using 4x4 lumber. Secure the frame together with 4” screws.
7. Once the frames are assembled, screw the provided brackets to the tops of the A-frames to hold the top beam.
8. Measure, cut, and assemble a platform for the slide. Leave gaps between the boards to allow for rainwater to slide through.
9. Screw the slide platform into two of the A-frames using the four inch screws.
10. Attach the A-frames to the top beam using carriage bolts and nuts that come with the kit.
11. Once the frame is completely assembled, carefully tilt it right-side-up into position.
12. Screw some additional 2x4s to the A-frame on the inside of the slide platform to act as railings.
13. Screw the slide to the platform. To keep the slide from pushing forward, you can add some additional stakes into the ground underneath the bottom of the slide and secure the slide to those stakes.
14. Screw more 2x4s to the A-frame to make a ladder for the platform, or screw them closer together and attach rock climbing grabs in select locations.
Resources:
Tom installed the Do-It-Yourself Pioneer Custom Play Set, which is manufactured by Swing-N-Slide (/). It comes with a basic set of swing set parts and then you can order additional parts to customize it to your needs.
The lumber Tom used to assemble the swing set was Western Red Cedar.
All the other tools and materials used for this project, including the drill driver, screws, and speed square can all be found at home centers.
Expert assistance with this project was provided by the Western Red Cedar Lumber Association (/) and Nathan Gilbert Carpentry.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook:
Twitter:
Pinterest:
Instagram:
Tumblr:
For more on This Old House and Ask This Old House, visit us at:
How to Build a Swing Set | Ask This Old House
/
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.